![]() ![]() Different series of transistors have different pinouts. The MK-328 even shows the voltage loss of. The ESR measurement is the Equivalent Series Resistance. This was a 10 MicroFarad capacitor, and it’s reading about 10.79, which is within 10% tolerance. ![]() When I ran the test, the results appeared as follows: Remember Electrolytic capacitors are polarized. In this test, I removed the LED, and I inserted an electrolytic capacitor. The meter even gave a readout of the LED’s Capacitance! The meter correctly showed the “Cathode” was connected to pin 1 of the meter. Even though the LED is polarized, the MK-328 seemed to figure everything out just fine.Īfter the test was complete, the results displayed on the screen. It did not matter which way I inserted the LED. I placed the “Jig” on the meter, and inserted the LED. ![]() That I can plug in to easily test the parts. In my first test, I checked out a simple LED. It’s very frustrating to put a project together, then to spend a huge amount of time troubleshooting troubleshooting parts that are not meeting the required specifications. Sometimes I even question whether the parts, such as MOSFETS will even work at all. When buying some electronic parts on Ebay, I’m always questioning whether the parts are fake or real. After the first few tests, though, I was very impressed. For such a low price, I was worried about the accuracy.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |